StaticSmart ESD Epoxy Floor Coating

StaticSmart SmartCoat ESD Epoxy
Durability and value with superior ESD protection

StaticSmart SmartCoat ESD combines permanent conductivity, durability and value for applications requiring an inexpensive, easily installed ESD floor coating.

Despite its low cost, SmartCoat meets or exceeds all the recommended guidelines for static control flooring in ANSI/ESD S20.20. It's an ideal ESD floor solution for leased spaces — for one-third the price, SmartCoat provides the same ESD properties as much more expensive ESD epoxy coatings like Garland or Stonhard. SmartCoat floors are durable, attractive and they can be applied over most flooring materials including concrete, wood and old tile. The most impressive aspect of SmartCoat is the ease of application. It's as simple to install as conductive acrylic paint but it also provides the durability you expect from permanent ESD floors.

SmartCoat is a two part ESD epoxy coating that can be applied by both novices and professionals. Many of our clients actually apply their SmartCoat ESD floor themselves. SmartCoat is extremely easy to repair; it's ideal for challenging applications like warehouses and fork lift applications like shipping/receiving areas. SmartCoat installs for less than $1.00 per square foot but with minor maintenance it will look as attractive as ESD floors and epoxy that cost 3 to five times more. It can even be cleaned and shined using StaticSmart maintenance products.

Here are some of the Features:

2 component water based epoxy
Abrasion resistant
Permanent ESD properties
Chemical resistant
Can be installed in occupied areas
Fast curing for quick turn-around
No installation skills needed
Costs less than 1 dollar per square foot
Easily repaired
Ideal for warehouses and abusive applications
Tough as polyurethanes and expensive ESD epoxies
Puts conductive acrylic paints to shame

SmartCoat Application and Maintenance
New concrete floors should be allowed to cure a minimum of thirty days. Application to floors colder than 60 F is not recommended. Floor surfaces must be free of any release agents, curing compounds, salts or efflorescence before coating. Sweep and then wash floors with an appropriate cleaning product to remove oil, grease, and soil. Follow by etching surface with an etching solution, then thoroughly rinse with clean water.

StaticSmart ESD Epoxy Flooring installed in a manufacturing environment. If floor has been previously coated, a small area should be cleaned, roughed up by screen disking with an 80 Grit screen, and then sealer applied to test for adhesion, lifting, etc. Any areas of the existing coating which display poor adhesion should be stripped. Wash the stripped areas, acid etch, and rinse thoroughly. Allow the floor to dry.

Catalyzed SmartCoat should be used within six hours of mixing, therefore, prepare only the quantity necessary for immediate use. Add premeasured catalyst to epoxy base. Stir gently until the catalyst has been thoroughly mixed in. Allow catalyzed SmartCoat to stand for 5 minutes.

Apply catalyzed SmartCoat with a short nap roller in thin, uniform coats. The initial coat will cover approximately 400-500 ft² per gallon. Allow the initial coat to dry for 5-7 hours, then apply a second coat. Second coat coverage is approximately 500-600 ft² per gallon.

NOTE: This product is not recommended for applications that experience reoccurring standing water. Finished floors may be opened to light traffic, under normal curing conditions, after 12 hours. Complete curing with maximum durability and chemical resistance will take 5-7 days.

Surface resistance:	1.0 x 10⁶ – 1.0 x 10⁹
Body Voltage Decay:	0.02 seconds

Four colors to choose from:

Beige

Medium Gray

Light Gray

Tan

Due to variations in printed materials and computer monitor displays, color shown may not be exact. For true accurate color, please email Sales to request an actual sample, or call (978) 276-0820.

*Epoxy Materials are a non-returnable item.
**Julie Industries is not responsible for joint repair after installation of epoxy.

SmartCoat ESD Epoxy Product Info

Epoxy MSDS Sheets:

SmartCoat ESD Epoxy MSDS

Epoxy Info Sheets:

SmartCoat ESD

Epoxy Ordering Terms & Conditions

*Epoxy Materials are a non-returnable item.
**Julie Industries is not responsible for joint repair after installation of epoxy.